The new DX225LC-3 offers a marked uplift in power and performance over the previous generation of excavators.
Across the performance spectrum Doosan has delivered big gains.
New hydraulic pumps and valves deliver higher hydraulic flow, which combined with a boost in system pressure, provides an overall increase in hydraulic performance, resulting in enhanced front and power functions, increased lifting capabilities, lower cycle times and higher breakout forces.
Traction force is up 8%. The engine brings 10% more power and engine torque, which adds up to an 18% reduction in fuel consumption and 13% uplift in productivity.
In the standard monobloc configuration, the maximum digging depth is 6.58 m and maximum digging reach is 9.8 m at ground level.
Spec check: DX225LC-3 excavator
• Buckets: 0.39 – 1.49 m3
• Operating weight: 21.9 – 23.9 t
• Digging depth (std front): 6585 mm
• Digging reach (std front): 9885mm
• Digging height (std front): 9560mm
• Overall width: 2990mm
• Height (std front): 3005mm
• Overall length in travel position (std front): 9490mm
• Rear swing radius: 2790mm
• Drawbar pull: 22.4 t
• Digging force over bucket (ISO): 15.2 t
• Digging force over arm (ISO): 10.8 t
• Lifting capacity at ground level (over front): 7.26 t at 6.0 m
• Travel speed: low range – 3 km/h high range – 5.5 km/h
• Engine (SAE J1995 net): 6-cylinder Doosan DL06KB
Stage IIIB (EGR), 124 kW (167 HP) at 1800 rpm